5v two

"Secureye offers the latest collection of wireless Cameras to obtain multiple needs. There are multiple cameras like 5 Megapixel with Full HD WDR IR Network Speed Dome PTZ Camera. Wireless Camera from Secureye gives the full privilege to install at anywhere power is available without running a video cable while maintaining the high standard that wired CCTV cameras to offer. These WiFi CCTV cameras simply require 5V – 12V DC power to be provided using a wall power adapter, and video is transmitted wire-free. Wireless CCTV Cameras are the best Security cameras available in all industries. The most important advantages of using IP based wifi camera is signal penetration through restriction, signal encryption, and resistance to interference from other devices. Our Wireless Camera gives you perfect security in the easiest way by connecting to your home router network and allowing you to view, control remotely using your android, iPhone, smartphones, tablet, and computer. You will get recording options such as continue recording, scheduled and motion detection activated recording to a computer hard-disk, NVR, and straight to a Micro SD card. The indoor wireless camera also features a built-in microphone, two-way audio communication, and Pan Tilt Zoom. If you have not sufficient time or resources to be constantly monitoring your security system, our Wireless Security Cameras can inform you by sending notifications, email alerts straight to your smartphone, tablet, and other smart devices.

The QZ USB-C 3.1 4-Port Hub expands USB connectivity of your Type C devices. With built-in 1 inch USB-C 3.1 cable it offers greater mobility at work. 2 USB 3.1 GEN1 SuperSpeed ports support data transfer rates of up to 5Gbps. One of the two USB-A ports is BC 1.2 compatible with max 7.5W (5V/1.5A) output, can charge the connected USB-A devices (mobile phones, tablets, U-disk,etc). One of the two Type-C ports is designed for transmitting data (5Gbps) and charging for the connected Type-C device, another Type-C port supports both data (5Gbps) and PD 3.0 charging the host 100W (20V/5A). It can work on Macbook or Google new Chromebook Pixel and other USB-C supported devices. • Instant access to 4 USB 3.1 GEN1 SuperSpeed ports. It can work on Macbook or Google new Chromebook Pixel and other USB-C supported devices. • Data transfer rate up to 5 Gbps (actual rates depend on device and computer USB host controller). Backward compatible with USB 2.0 Hi-Speed devices (rates up to 480Mbps), and USB 1.1 Full/Low Speed devices (rates 12/1.5 Mbps) • 2 USB 3.1 GEN1 Type-A SuperSpeed ports support data transfer rates of up to 5Gbps. One of the two USB-A ports is BC 1.2 compatible with max 7.5W (5V/1.5A) output, can charge the connected USB-A devices (mobile phones, tablets, U-disk, etc). • One of the two Type-C ports is designed for transmitting data (5Gbps) and charging for the connected Type-C device (5V/1.5A), another Type-C port supports both data (5Gbps) and PD 3.0 charging the host max 100W (20V/5A). (When two or more ports are simultaneously connected, the total max output depends on the host PC (eg, max 900mA on Chromebook, max 1.5A on Macbook)) • Support Fast Role Swap of PD3.0, the connected USB device will not get disconnected when plugging out PD Adapter (This function works when this product is working on PD 3.0 host PC) • The built-in 1 inch USB-C 3.1 cable it offers greater mobility at work. • Sleek design, saves space, enhances mobility • Bus powered, plug and play (individual devices / USB 3.1 GEN1 host controller may require drivers), supports hot swap

Specification Working voltage: 5V Support: mp3/bluetooth/USB/FM/memory card/Mic slot/IR antenna slot/Big digital display/Big remote controller Excellent sound quality Can connect speakers directly Cheap and easy to install Remote for easy handling This is an all in one player and decoder module. This board consists of Bluetooth, FM with MIC Slot, Ir antenna slot, Big Digital Display, USB, MP3 Stereo Audio Player and Decoder Module with Big remote controller. The working voltage of this module is 5V DC. You can either use this board in your DIY project or you can connect two normal size speakers with it for audio amplification purposes. The body of the module is build-up of hard plastic. You only need to connect a speaker and a 5V DC current supply and the board is ready to go. So if you are looking for a module with so many features then this little buddy is the right choice for you.

1/2.7” 2MP CMOS Image Sensor (0.9407 centimeters) 3.6mm Lens H.264 High Profile Video Compression Wi-Fi Support Max. 20fps@1080P IR Distance of 15 Mtr. Works with Alexa Image Sensor 1/2.7” CMOS sensor (0.9407 centimeters) Min. Illumination 0.01 Lux Max Frame Rate 20fps Screen Resolution 1920 x 1080 Image Compression H.264 High Profile Lens 3.6mm lens Angle of View 80° Pan Range Horizontal: 355° & Vertical: 85° IR IR LEDs up to 15 meters Audio Input Built-in Mic Ethernet Standard 1xRJ45 10/100 Mbps Audio Output Speaker BodyType PT Camera Wireless IEEE 802.11n: 150Mbps, IEEE 802.11g: 54Mbps, IEEE 802.11b: 11Mbps Audio Two Way Audio Work with Alexa Support Work with Google Assistant Support Wireless Antena One, Omnidirectional Wireless Security WEP & WPA, WPA2 Wi-Fi Range 30m (Open Area) Micro SD SD card (up to 128GB) Power Source 5V/1A Dimension 88mm x 88mm x 107mm Net Weight(g) 368.6g

Image Sensor 1/2.7” CMOS sensor (0.9407 centimeters) Min. Illumination 0.01 Lux Max Frame Rate 20fps Screen Resolution 1920 x 1080 Image Compression H.264 High Profile Lens 3.6mm lens Angle of View 80° IR IR LEDs up to 15 meters Audio Input Built-in Mic Audio Output Speaker Wireless IEEE 802.11n: 150Mbps, IEEE 802.11g: 54Mbps, IEEE 802.11b: 11Mbps Audio Two Way Audio Work with Alexa Support Work with Google Assistant Support Wireless Antena One, Omnidirectional Wireless Security WEP & WPA, WPA2 Wi-Fi Range 30m (Open Area) Micro SD Yes (up to 128GB) Power Source 5V/1A Plushtechnologies

Seal pack 1 quantity only **Not used new condition** ADS1115 16-Bit ADC – 4 Channel with Programmable Gain Amplifier is mostly used for microcontrollers project which needs an analog-to-digital converter or when you want a higher-precision ADC. ADS1115 16-Bit ADC- provides 16-bit precision at 860 samples/second over I2C. The chip can be configured as 4 single-end input channels or two differential channels. Additionally, ADC also includes a programmable gain amplifier, up to x16, to help boost up smaller single/differential signals to the full range. We like this ADC because it can run from 2V to 5V power/logic, can measure a large range of signals and it’s super easy to use. It is a great general-purpose 16-bit converter. The ADS1115 chip is fairly small so it comes on a breakout board with ferrites to keep the AVDD and AGND quiet. Interfacing is done via I2C. The address can be changed to one of four options (see the datasheet table 5) so you can have up to 4 ADS1115’s connect on a single 2-wire I2C bus for 16 single end inputs.