Valve industry

PTFE butterfly valve is to adapt to some corrosive environment with strong acid, strong alkali, petroleum, chemical, food and other special areas of need, the use of PTFE made of the valve body, has a strong anti-corrosion effect. It can replace the stainless steel body under conventional conditions, with higher cost performance. The butterfly plate of the butterfly valve is installed in the diameter direction of the pipe. In the cylindrical channel of the butterfly valve body, the disc shaped butterfly plate rotates around the axis, the rotation Angle is 0°~90°, rotate to 90°, the valve brand is fully open. Below photos are PTFE Lined Butterfly Valve of Tianjin Tanghai Valve, more information please click here: PTFE butterfly Valve. PTFE (Teflon) butterfly valve can be equipped with AKR electric, BY pneumatic actuator, input control signal (4~20mADC or 1~5VDC) and single-phase power supply can control the operation, can realize intelligent type (regulating type) and switching type. With strong function, small size, light and pleasant, reliable performance, simple supporting, large circulation capacity, especially suitable for the medium is sticky, containing particles, fiber properties of the occasion. At present, the PTFE butterfly valve, as a component used to realize the on-off and flow control of the pipeline system, has been widely used in petroleum, chemical industry, metallurgy, hydropower and many other fields. In the known butterfly valve technology, its sealing form is mostly sealed structure, sealing materials for rubber, PTFE, etc. Due to the limitation of structural characteristics, it is not suitable for high temperature resistance, high pressure resistance, corrosion resistance, wear resistance and other industries. TH Valve is a professional manufacturer of butterfly valve, gate valve, check valve, globe valve, knife gate valve, ball valve with API, JIS, DIN standard, used in Oil, Gas, Marine industry, Water supply and drainage, fire fighting, shipbuilding, water treatment and other systems, with Nominal Diameter of DN50 to DN1200, NBR/EPDM/VITON, Certificates & Approvals: DNV-GL, Lloyds, DNV, BV, API, ABS, CCS. Standards: EN 593, API609, API6D

A gate valve is a gate plate of an opening and closing part. The movement direction of the gate plate is perpendicular to the direction of the fluid. The gate valve can only be fully opened and fully closed, and cannot be adjusted or throttled. The gate valve is sealed by the contact of the valve seat and the gate plate. Usually, the sealing surface will be welded with metal materials to increase wear resistance, such as 1Cr13, STL6, stainless steel, etc. The gate has a rigid gate and an elastic gate. According to the different gate plates, the gate valve is divided into a rigid gate valve and an elastic gate valve. Area of application Marine industry, Water supply & drainage, fire fighting, shipbuilding, water treatment, power stations, energy, food, chemical, and other systems Data sheet of gate valve: TYPE: Wafer, double flange SIZE & CONNECTIONS: Resilient seated: DN50 to D600 Metal seated: DN50 to DN1200 MEDIUM: Waste water, Water, Seawater, Air, Inert Gas, Oil. MATERIALS: Cast Iron / Ductile Iron/ Carbon Steel / Stainless Steel / Alu Bronze PRESSURE RATING: PN10, PN16, PN25 TEMPERATURE: -30°C to 200°C SEAT/LINING: Replaceable Liner / Bonded Liner NBR/EPDM/VITON; SS/BRONZE CERTIFICATES & APPROVALS: DNV-GL, Lloyds, DNV, ABS, BV Type Approval 3.1 & 3.2 Cert (on request) Standards Design and Manufacture Conform to AWWA, BS5163, DIN-F4,F5 Dimensions Conform to EN1092-2,ANSI B16.5 Face to Face dimensions Conform to EN558-1, API 594, DIN3202 Testing Conform to EN12266-1, API598 Material of gate valve Parts PART NAME Material BODY Cast Iron; Ductile Iron; Stainless Steel; Carbon steel DISC / FLAP Stainless Steel; Carbon steel; Bronze SHAFT / STEM Brass, Stainless Steel Monel; Stainless Steel Inconel SEAT / LINING NBR/EPDM/VITON SS/BRONZE BOLTS Carbon steel NUTS Stainless steel GASKET/PACKING Graphite NAME PLATE Aluminum WASHER Steel HANDWHEEL Cast Iron BUSHING/RING Cast Brass Actuation Worm-gear/hand-wheel Electric-actuator Pneumatic-actuator Hydraulic-actuator Gate valve features Advantages: Low flow resistance. Less effort when opening and closing. Large height and long opening and closing time. Water hammer phenomenon is not easy to produce. The reason is the long shutdown time. The medium can flow in any direction on both sides, easy to install. The structure length is small. The shape is simple, the structure length is short, the manufacturing process is good, and the application range is wide. The structure is compact, the valve has good rigidity, the channel is smooth, the flow resistance is small, the sealing surface is made of stainless steel and hard alloy, and the service life is long. The use of PTFE packing is reliable and easy to operate. Disadvantages The overall dimensions and opening height are large. The space required for installation is large. During the opening and closing process, there is relative friction between the sealing surfaces, which can easily cause scratches. Gate valves generally have two sealing surfaces, adding some difficulties to processing, grinding and maintenance. Related types of valves: We can also produce check valve, globe valve, knife gate valve and ball valve with API, JIS, DIN standard, used in Oil, Gas, Marine industry, Water supply and drainage, fire fighting, shipbuilding, water treatment and other systems, with Nominal Diameter of DN50 to DN1200, NBR/EPDM/VITON, Certificates & Approvals: DNV-GL, Lloyds, DNV, BV, API, ABS, CCS. Standards: EN 593, API609, API6D, More video of gate valve, please see: https://www.youtube.com/watch?v=AI-LT1dy2sU

Product Introduction Marine butterfly valve adopts the mounted structure, which reduces the connection bolts of the valve body itself under the condition of high pressure and large diameter, enhances the reliability of the valve and can overcome the influence of system weight on the normal work of the valve. Scope of application Marine butterfly valve is widely used in coal chemical industry, petrochemical industry, rubber, paper making, pharmaceutical and other pipelines as the medium of the shunt confluence or flow switching device. Tianjin Tanghai Valve Co., Ltd. is a professional marine valve manufacturer, including butterfly valve, check valve, gate /Knife gate valve. We have certificates: CE, ISO, BV, DNV foundry and products approval. Now we have our own independent R & D, manufacturing, assembly and warehousing workshops; we have professional pre-sale and after-sale technical support and perfect services. Below is our wafer butterfly valve of marine valves,if you need to check more information, please click here:https://www.tanghaivalve.com/wafer-type-butterfly-valve-th-btv-aw/. Please contact us if you need more support, please contact us freely: info@tanghaivalve.com. We are committed to “Build a top valve enterprise; Be a reliable partner!” Friends from all over the world are welcome to visit us for evaluation, guidance, and orders!

Single-disc swing check valve (TH-CKV-SDS) Area of application Marine industry, Water supply and drainage, fire fighting, shipbuilding, water treatment and other systems Data sheet of Single-disc swing check valve TYPE: Wafer, single disc SIZE & CONNECTIONS: DN50 to D600 MEDIUM: Air, Inert Gas, Oil, Seawater, Waste water, Water MATERIALS: Cast Iron / Ductile Iron/ Carbon Steel / Stainless Steel / Alu Bronze PRESSURE RATING: PN10, PN16 TEMPERATURE: -30°C to 200°C SEAT/LINING: Replaceable Liner / Bonded Liner NBR/EPDM/VITON CERTIFICATES & APPROVALS: DNV-GL, Lloyds, DNV, ABS, BV Type Approval 3.1 & 3.2 Cert (on request) Standards Design and Manufacture Conform to API 6D Dimensions Conform to ANSI B16.5 Face to Face dimensions Conform to API 6D Testing Conform to API598 Material of Single-disc Swing check valve Parts PART NAME Material BODY ASTM A182 F304 A216 WCB DISC / PLATE ASTM A182 F304 A216 WCB A536 65-45-12 SHAFT / STEM SS431/SS420/SS410/SS304 SEAT / LINING NBR/EPDM/VITON BOLTS Carbon steel NUTS Stainless steel SPRING SS304/SS306 Sing-disc swing check valve features The structure length is short, its structure length is only 1/4~1/8 of the traditional flange check valve Small size, light weight, its weight is only 1/4~1/20 of the traditional flange check valve The valve disc closes quickly and the water hammer pressure is small Both horizontal and vertical pipes can be used, easy to install Smooth flow channel, fluid resistance is small Sensitive action and good sealing performance Short disctravel, low valve closing impact The overall structureis simple and compact, beautiful appearance Long service lifetime and high reliability Related types of check valves: We have other types of check valves: dual plate check valve, tilting disc swing check valve, lift swing check valve, silent check valve, ball check valve used in Oil, Gas, Marine industry, Water supply and drainage, fire fighting, shipbuilding, water treatment and other systems, with Nominal Diameter of DN50 to DN1200, NBR/EPDM/VITON, Certificates & Approvals: DNV-GL, Lloyds, DNV, BV, API, ABS, CCS. Standards: EN 593, API609, API6D,

Marine valves are used to control the pressure, flow and flow policy of the fluid in the ship pipeline in order to meet the environmental conditions of the ship. Valve is the control of fluid pipeline assembly, its basic function is to put through or cut off the pipeline medium smoothness, change the medium smoothness, change the direction of the flow of the medium, adjust the pressure and flow of the medium, protect the normal operation of the pipeline equipment. According to the requirements of the shipbuilding industry of our country, a total of 12 general valves are designed, 1400 specifications. The height limit pressure of the valve is 25MPa and the diameter is 900mm. Valve materials are cast iron, carbon steel, alloy steel, copper alloy, aluminum alloy, titanium alloy, stainless steel, and non-metallic etc. Common medium for fresh water, sea water, air, steam, fuel oil, oil and so on. Ball and butterfly valves, with their advantages of light weight, small size, good sealing function and easy opening and closing speed, have gradually gained operation on ships, and more and more efforts are being made to replace stop valves and gate valves, improving the functions of ships. Electric gate valve, electric globe valve, electric sea access valve, electro-hydraulic ball valve, electro-hydraulic butterfly valve, pneumatic butterfly valve and other remote control valves have gradually been adopted by the department ship system, and the operation of hydraulic valve remote control system has long improved the level of modernization of ships. The special valves required by the function requirements of various systems on ships, such as high pressure butterfly valve, leading full-open safety valve, sea water solenoid valve, high piezo-liquid ball valve, changing hydraulic gate valve, special pressure reducing valve, temperature regulating valve, high pressure air solenoid valve, night displacement trap, general butterfly valve, etc., can also be developed by themselves to supply ship operation. Tianjin Tanghai Valve Co., Ltd. is a professional marine valve manufacturer, including butterfly valve, check valve, gate /Knife gate valve. We have certificates: CE, ISO, BV, DNV foundry and products approval. Now we have our own independent R & D, manufacturing, assembly and warehousing workshops; we have professional pre-sale and after-sale technical support and perfect services. Below is our wafer butterfly valve of marine valves, if you need to check more information, please click here: butterfly valve :https://www.tanghaivalve.com/wafer-type-butterfly-valve-th-btv-aw/; ball valve: https://www.tanghaivalve.com/ball-valve-th-bav/ Please contact us if you need more support, please contact us freely: info@tanghaivalve.com. We are committed to “Build a top valve enterprise; Be a reliable partner!” Friends from all over the world are welcome to visit us for evaluation, guidance, and orders!

Working Pressure: PN10/PN16 Size: From DN40-DN1200 Operator: bare shaft with ISO 5211 top flange, handlever and gearbox,actuators Body material:CI,DI,Alu-bronze,CS and others Disc:DI,Alu-bronze,SS Seat:EPDM,NBR Shaft:SS, Inconel About material, it can be customized, please contact us if any further requirements. Area of application Marine industry, Water supply and drainage, fire fighting, shipbuilding, water treatment and other systems Standards Design and Manufacture Conform to EN 593, API609, JIS Flange dimensions Conform to EN 1092-2 PN10, PN16, JIS5K, JIS10K Face to Face dimensions Conform to EN558 series Topwork’s dimensions Conform to ISO5211 Testing Conform to API598、EN12266-1 Actuation Hand lever Worm-gear/hand-wheel Electric-actuator Pneumatic-actuator Hydraulic-actuator Wafer type butterfly valve features Simple structure and easy operation Easy installation and good sealing Long service life and high reliability Good interchangeability of parts and cost saving Wafer type butterfly valve with concentric design Using backless structure, Rubber fusion bonded on valve body Replaceable, resilient seat Streamlined disc, one-piece stem Approved and registered by VdS, DVGW Related types of butterfly valves: We have other types of butterfly valves: Lug type butterfly valve, U flange butterfly valve, double flange butterfly valve, fluorine lined PTFE butterfly valve, double eccentric butterfly valve and triple eccentric butterfly valves used in Marine industry, Water supply and drainage, fire fighting, shipbuilding, water treatment and other systems, with Nominal Diameter of DN50 to DN1200, NBR/EPDM/VITON, Certificates & Approvals: DNV-GL, Lloyds, DNV, BV, API, ABS, CCS. Standards: EN 593, API609, API6D,

The Dual Plate check valve is used for pure pipeline and industrial, environmental protection, water treatment, high-rise building water supply and drainage pipeline, to prevent the reverse flow of the medium. The double-door check valve adopts clamping type, the butterfly plate is two semicircle, and the sealing surface can be body surfacing wear-resistant material or rubber lining, wide range of use, reliable sealing. If you need more information, please click here: dual plate swing check valve, you can get more information here. Check valve opening and closing parts by the medium flow and force to open or close, to prevent the medium backflow of the valve called check valve. Check valves belong to automatic valves, mainly used for medium one-way flow on the pipeline, only allow the medium to flow in one direction, in order to prevent accidents. TH Valve is a professional manufacturer of butterfly valve, gate valve, check valve, globe valve, knife gate valve, ball valve with API, JIS, DIN standard, used in Oil, Gas, Marine industry, Water supply and drainage, fire fighting, shipbuilding, water treatment and other systems, with Nominal Diameter of DN50 to DN1200, NBR/EPDM/VITON, Certificates & Approvals: DNV-GL, Lloyds, DNV, BV, API, ABS, CCS. Standards: EN 593, API609, API6D.

Description Since its establishment in 1993, China Zhejiang One Valve Co., Ltd. has become a leading name in the valve manufacturing industry, celebrated for its focus on quality and customer satisfaction. The company offers end-to-end solutions, covering research, development, production, and sales of a wide array of valve products. Onero is dedicated to fostering international growth through integrity and effective communication, all while ensuring the reliability of industrial pipeline systems. Onero’s expertise lies in producing ball valves, gate valves, check valves, globe valves, and Y-strainers, adhering to global standards such as API, JIS, BS, and DIN. With over 20 years of experience, Onero ensures highly competitive pricing and exceptional product quality, along with certifications that meet specific customer needs. The company’s strong team has helped Onero build a reputable brand both in domestic and international markets. With long-standing relationships with premium raw material suppliers, Onero optimizes efficiency in production. They also provide OEM and ODM services and maintain strict quality control protocols to guarantee excellence. Onero invites potential partners to explore new opportunities for collaboration.

Position:- trainee draftsman or Engineer Vacancy-01 Job Description- 1) Must have knowledge of AutoCAD. 2) Hands on experience in casting parts drafting. 3) Sound knowledge of valve. 4) The candidate must has ITI/Diploma in mechanical with 0-6moth experience in design. 5) Should have a good communication. 6) Experience 1 to 2 years into Valve Industry.

AWWA technology provides best self-Lubricated bearings in india. that deals with Industry quality leaders catering to the Valve industry, Automotive Industry, Plastic machinery, Construction and Agriculture machinery, Hydraulic machinery and General industrial machinery. https://awwatechnologies.in/index.html call us at - show contact info mail us at - show contact info

"welder Buffing operator one year experience " Job description Company: (Core Industry,Automobile) Functional Area (Production, Manufacturing, Maintenance) Role: Company Role("Buffing and Polishing Set-Up Operator") Sets and adjusts machine controls according to product specifications, utilizing knowledge of machine operation Holds stick of buffing compound or turns valve and depresses pedal to administer coolant to work piece surface. Qualification: BE & Diploma Salary: 18k+OT Shift: 8 Hours(Rotational & General) Benefits: Food & Transport also provided OT + Incentives + Increments based on ur Knowledge Further Details Contact us: HR Abitha 63852@35307

Huge Openings for HVAC Technician Jobs... Installed operated and maintained air conditioning and refrigeration equipment including compressor, pumps, evaporators, expansion valves, solenoid valve control and related equipment. HVAC Maintenance Engineer/ Technician Should have experience in the maintenance of various types and makes of Chillers, HVAC equipment/system, Air Conditioning units refrigeration equipment, accessories and their control. Qualification: ITI / Diploma / BE (Mech / EEE) Experience: Freshers Salary: 12k to 15k Functional Area: HVAC Technician Maintenance Engineer Industry: IT Company MNC Job Type: Permanent Job / Direct Company Staff Work Location: Chennai (Sholinganallur) Further Details Contact Nandhini HR 99623@@21948

"welder Buffing operator one year experience " Job description Company: (Core Industry,Automobile) Functional Area (Production, Manufacturing, Maintenance) Role: Company Role("Buffing and Polishing Set-Up Operator") Sets and adjusts machine controls according to product specifications, utilizing knowledge of machine operation Holds stick of buffing compound or turns valve and depresses pedal to administer coolant to work piece surface. Qualification: BE & Diploma Salary: 18k+OT Shift: 8 Hours(Rotational & General) Benefits: Free food,Transport & Accommodation Further Details Contact -6382386599

Instrument Engineer Immediate Wanted Freshers... Participation in technical review meetings such as P&ID review, package reviews, HAZOP and SIL assessment. Preparation, checking and review of Instrument and control system datasheets & specifications. Selection of Instruments for P&IDs of Industry technology plants. Sizing and selection of inline instruments such as Control valve, Flow elements and Pressure safety valves using Conval and Engineering base. Preparation and review of I/O list, Instrument index, hook-up diagrams, Cause and effect diagrams. Preparation of Complex Loop diagrams, Functional logic and Trip diagrams. Qualification: ITI / Diploma / BE Instrumentation Engineer Experience: Freshers Salary: 12k to 15k Functional Area: Production / Quality / Maintenance Location: Chennai Further Details Contact Brindha HR 73582@@32554